Bike Rack Setups - Show Yours!

[MountainStang]

Hey Everyone,

I’m just curious what is out there for various mountain biking and road bike setups, would like to see a bunch of pics of everyone’s setups!

Sponsored

 

[mwf5888]

I use a hitch rack from Thule. Hold my hard tail or FS and my wife's FS eMTB.

 

[MountainStang]

Looks good, this is similar to what I was thinking of doing

 

[mwf5888]

Looks good, this is similar to what I was thinking of doing

With no bikes on the rack, it will fold down 45 degrees and you can open the tailgate. Of course, it folds up 90 degrees with no bikes as well. It takes me less than 3 minutes to install/uninstall.

 

[JoeRedFly]

Kuat hitch rack for ours. My road bike fits in the cab just fine, but for mountain biking, gravel, or my heavy electric hunting bike the hitch rack is perfect.

 

[PaulGrun]

Our bike goes on a Rhino Rack which fits into T-slot rails on our tonneau.

 

[Fordstream]

Yakima Jetstream bars and Highroad rack on top of Retrax Pro cover

 

[uk_brewer]

Hitch rack from https://1up-usa.com/

 

[okmurdog]

Yakima Jetstream bars and Highroad rack on top of Retrax Pro cover

What is the part number of the items that connect the Jetstream Bars to the T-slots on the Retrax?

 

[okmurdog]

Our bike goes on a Rhino Rack which fits into T-slot rails on our tonneau.

I presume you are using PN RTL600 to connect the Rhino Rack cross-bars to the T-slot rails on the tonneau?

 

[Vin]

Our bike goes on a Rhino Rack which fits into T-slot rails on our tonneau.

The length of your bike is impressive.

 

[PaulGrun]

I presume you are using PN RTL600 to connect the Rhino Rack cross-bars to the T-slot rails on the tonneau?

Yes. I used the following parts, all from Rack Attack:
1. Rhino rack Vortex bars - 71” RRVA180B
2. Rhino rack Quick Mount leg - RRRLT600
3. Rhino rack Wuick Mount heavy duty spacer 20mm - RRQMHD20

The 20mm spacer is key, since it raises the rack just enough that the handle on the RetraxPro XR can slide underneath.
Here’s a pic:

 

[PaulGrun]

What is the part number of the items that connect the Jetstream Bars to the T-slots on the Retrax?

See my post below for the parts I used. I went with Rhino Rack for no particular reason. Near as I can tell they are more-or-less equivalents.

 

[PaulGrun]

The length of your bike is impressive.

LOL! That’s kinda the nature of a tandem, eh? We don’t call ‘em long bikes for nuthin’.

 

[okmurdog]

Yes. I used the following parts, all from Rack Attack:
1. Rhino rack Vortex bars - 71” RRVA180B
2. Rhino rack Quick Mount leg - RRRLT600
3. Rhino rack Wuick Mount heavy duty spacer 20mm - RRQMHD20

The 20mm spacer is key, since it raises the rack just enough that the handle on the RetraxPro XR can slide underneath.
Here’s a pic:

Thanks!

Sponsored